Spider by Safway Group
Request Catalog

Request Information
Click to Enter Spanish Site
  • Designed to work on a horizontal I-beam
  • SA-1003 fits flanges 4 to 10 in. (102-254 mm) wide
  • SA-1003-1 Thick Flange Adapter Bracket adapts either beam roller to flanges up to 2 1/4 in. (70 mm) thick. Order two for each SA-1003 roller.
Unit of Measure

Specifications

Load/Capacity

N/A 1500 lb680.4 kg

Weight

N/A 10.9 lb4.9 kg

Used With

N/A Flanges 4-10 in. (102-254 mm wide)

Construction

N/A Aluminum

Key Features

Key Features

N/A
  • Heavy duty steel construction
  • Time-tested design
  • No tools required for installation
  • Built by Spider in the USA

Notes for Use

Notes for Use

N/A
  • The beam width needs to be known in advance, as the flange width is needed to determine the location of the fixed roller.
  • The beam flange should be a consistent width, with no cutouts or notches that would allow the roller to roll off.
  • Block or clamp the end of the beam to keep the roller from rolling off using 702067-1 end stop.
  • The beam must be level, as rollers do not have a brake.