Spider by Safway Group
Request Catalog

Request Information
Click to Enter Spanish Site
Unit of Measure
Items
I-Beam Rollers

I-Beam Rollers

I-Beam Rollers

I-Beam Rollers
Description N/A
  • Designed to work on a horizontal I-beam
  • SA-1003 fits flanges 4 to 10 in. (102-254 mm) wide
  • SA-1003-1 Thick Flange Adapter Bracket adapts either beam roller to flanges up to 2 1/4 in. (70 mm) thick. Order two for each SA-1003 roller.
N/A
  • Designed to work on a horizontal I-beam
  • SA-1003-22 fits flanges up to 16 in. (406 mm) wide and 1 3/8 in. (35 mm) thick
  • SA-1003-1 Thick Flange Adapter Bracket adapts either beam roller to flanges up to 2 1/4 in. (70 mm) thick. Order two for each SA-1003 roller.
Load/Capacity N/A 1500 lb680.4 kg
Weight N/A 10.9 lb4.9 kg N/A 13 lb5.9 kg
Used With N/A Flanges 4-10 in. (102-254 mm wide) N/A Flanges up to 16 in. wide and 1 3/8 in. (35 mm) thick
Construction N/A Aluminum
Key Features N/A
  • Heavy duty steel construction
  • Time-tested design
  • No tools required for installation
  • Built by Spider in the USA
Notes for Use N/A
  • The beam width needs to be known in advance, as the flange width is needed to determine the location of the fixed roller.
  • The beam flange should be a consistent width, with no cutouts or notches that would allow the roller to roll off.
  • Block or clamp the end of the beam to keep the roller from rolling off using 702067-1 end stop.
  • The beam must be level, as rollers do not have a brake.