Spider, a division of SafeWorks, LLC
Request Catalog

Request Information
Click to Enter Spanish Site
Suspended Access & Fall Protection > Suspended Scaffolding/Rigging > Rigging Products  
 

Rigging Products


Click on a category to drill down.

Spider Dual Monorail System - 1

Spider Dual Monorail System


 Precisely position curtain wall units horizontally and vertically with Spider’s NEW Dual Monorail System - a complete solution providing continuous, horizontal mobility for swingstages and material hoists around a structure’s perimeter.

Portable Outrigger Beams

Portable Outrigger Beams

(5)
5 x 5 Max Reach Assemblies

Down Under Assemblies


Engineered system to locate the rigging point down a vertical span and under a horizontal distance to access walls under deep cornices, caps or architectural features. Down height available is adjustable from 48 to 96 in., and horizontal (under) reach is 36 in. (914 mm) to 60 in. (1524 mm) with a 1500 lbs. (680.4 kg) maximum hoist capacity.
Corner Support Posts

Corner Support Posts


Extends reach of current outrigger beams by moving fulcrum point forward into building corners.
5x5 Max Reach

5 x 5 Max Reach Assemblies

(2)
Engineered, simple system extends outreach using standard 5 x 5 outrigger beams up to 8 ft. (2.4 m) at 1000 lbs. (453.6 kg)!

To use as a simply supported beam, on OBSF or suitable scaffold towers Be sure to verify leg loads can accept fulcrum load, order 704241-1. To use with 701960-1 gantry frames, order 704241-2. (Gantry head to accept 5 x 5 Max Reach also available separately as 704387-1.)

8-0217-5 5 x 5 Outrigger Kit sold separately.
H-Plate Assemblies

H-Plate Assemblies


Engineered connection to adjust outrigger beam rigging point and/or backspan to fit jobsite conditions.
Rolling & Fixed Outrigger Gantry Stands

Rolling & Fixed Outrigger Gantry Stands

(2)
The fulcrum and counterweight loads are split evenly between each leg.
Outrigger Beam Support Frames

Outrigger Beam Support Frames

(9)
Heavy duty steel frames stack in 4 ft 2 in. (1.3 m) increments for high parapet wall clearance with 8-0217, 8-0217 series, 700809-1 and 700819-1 beams.

Outreach/Capacity varies with frame spacing.
  • Frame configurations available with base plates or casters
  • Loading available for 1,000, 1,250 and 1,500 lb. (453.6, 567 and 680.4 kg) capacities depending on frame spacing and beam length
  • Can be stacked multiple tiers high when completed by qualified person
  • Extensive assembly instructions cover frame sizing, beam outreach (cantilever), suspended load available and allowable leg loads - makes set-up goof-proof
Aluminum Tube Outriggers

Aluminum Tube Outriggers


Counterweight Beam Sling

Counterweight Beam Sling


Save significant rigging time and effort by locating current counterweight bar 8-0285 on roof deck or structure. Weights slide easily onto counterweight bar eliminating the need to lift weight higher than waist level.
Adjustable Support Stands

Adjustable Support Stands


Beam Tie-Down Systems

Beam Tie-Down Systems


Splice Tubes (700757-1)

Splice Tubes

(3)
Spider pioneered the 3 ft (0.9 m) splice tube and now makes a 9 ft (2.7 m) splice tube to replace cumbersome splice plates held in place with nuts and bolts. The time saving splice tubes can be used on 6 x 4 and 5 x 5 H or I beams.
Post Shore Systems

Post Shore Systems


Parapet Hooks

Hooks & Clamps


Suspended from Outrigger Beam

C-Beam Assemblies


The C-beam allows rigging a suspension rope close to a building face below cornices and ledges. The C-beam can be used as a cornice hook, or it can be suspended from a standard outrigger beam with shackles, steel wire rope or turnbuckles.

Additional rigging notes apply to this product.
Truss Outriggers

Truss Outriggers

(2)
The truss outriggers are designed for rigging on large, horizontal I-beam trusses or structural flanged beams. They are especially useful when the suspension wire rope needs to be held a short distance away from the truss.

Fits beams with flange width of 6 in (152 mm) or larger.
Bottom Flange Truss Outriggers

Bottom Flange Truss Outriggers


The Bottom Flange Truss Outrigger expands ability to mount to bottom flange of beams when unable to rig from the top flange.
Tank Top Rollers - Pin Style

Tank Top Rollers - Pin Style


Steel roller with shackle for tieback and suspended load; Effective for rigid top petroleum and other storage tanks.
Ring Girder Rollers

Ring Girder Rollers

(3)
Steel construction with wheel as shown, shackle for tieback and suspended load; For use on floating top petroleum and chemical storage tanks.
I-Beam Rollers

I-Beam Rollers

(2)
Adjustable I-Beam Clamps

Adjustable I-Beam Clamps

(2)
Self-locking steel clamp fits I-beam flanges:
SA-1039 fits 1 1/2 to 4 in. (38 to 101 mm) wide
SA-1040 fits 1 1/2 to 8 in. (38 to 203 mm) wide
Adjustable Tank Edge Clamps

Adjustable Tank Edge Clamps


Designed for equipment tie-back or fall arrest anchorage. Reach is not designed for use as an equipment rigging device.
  • Adjustable for different size tank walls
  • Easily mountable
  • Two rigging holes so mounting can occur inside or outside a tank, depending on the wall's construction
  • Lightweight design
  • Rugged, durable construction
  • Made by Spider in the USA
LSR1 Limited Space Rescue Winch

LSR1 Limited Space Rescue Winch


The LSR1 is the most comprehensive method to achieve confined space rescue for workers on swing stages inside boilers, silos, refineries, penstocks, dams, shafts, water and sewer vessels, and similar areas.

For forced outages or where the scope of work is minimal, the LSR1 provides equipment rescue and with a second LSR1 unit installed personnel rescue which plant personnel are fully capable of installing and operating with basic training. The LSR1 helps plant owners, HSE and operations personnel achieve prompt rescue of injured workers and the very fast rescue required for electrocuted workers. The system's low cost and fast speed of set-up make it the attractive rescue solution for short duration boiler work or any confined ...
Transfer Chains (SA-1002)

Transfer Chains


Rugged steel rigging hooks and high quality steel chain expedite horizontal travel through structural steel safely and efficiently.
  • Transfer chains allow for 'walking' the rigging point by transferring weight back and forth from transfer chain to rigging point to move along a structural beam and around vertical obstacles without lowering the stage to the ground.
  • Makes it possible to transfer from the rigging point to transfer chain, to allow repositioning of the rigging point and reloading the suspension wire rope
  • Eliminates need to lower stage to ground to move rigging point
Accessories for Rigging Products (BD-00019)

Accessories for Rigging Products

(6)